EVR6-012S Solenoid Valve Used In Refrigeration System
|Payment Type:||L/C,T/T,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||2 Piece/Pieces|
|Delivery Time:||6 Days|
|Productivity:||1.2 thousand sets per week|
|Place of Origin:||CHINA|
|Supply Ability:||4700 sets/ 1 month|
Model No.: EVR6-012S
EVR6-012S Solenoid Valve Used In Refrigeration System
Our EVR6-012S refrigeration solenoid valve products are mainly used in all kinds of ice makers, ice makers, chillers, air conditioners, heat pumps and water dispensers.Our company is a manufacturer of solenoid valves, specializing in the production of refrigeration two-way solenoid valves, water solenoid valves, two-way three-way solenoid valves, pulse valves and other series of valves. For the convenience of users, it can also be equipped with diaphragm, pilot head, coil and other accessories. The company can provide you with special specifications of the design, manufacturing, technical advice and pre-sales and after-sales service, to eliminate your worries.
Technical Parameters of EVR6-012S solenoid valve for refrigeration:
KV value (m³/h)
SAE inlet/outlet ODF inlet/outlet (Solder) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm EVR3-014 EVR3-014S 1/4 6 0.5 14 2.8 71 - - 4.0 102 0.3 7 0.27
EVR3-038 EVR3-038S 3/8 10 0.5 14 2.9 73 - - 4.6 117 0.4 10 EVR6-038 EVR6-038S 3/8 10 0.5 14 3.1 79 - - 4.4 111 0.4 10 0.8
EVR6-012 EVR6-012S 1/2 12.8 0.5 14 3.1 79 - - 5.0 127 0.4 10 EVR10-012 EVR10-012S 1/2 12.8 0.6 16 3.1 79 - - 5.0 127 0.4 10 1.9
EVR10-058 EVR10-058S 5/8 16 0.6 16 3.1 79 - - 6.3 160 0.5 12
EVR15-058S 5/8 16 0.7 19 3.4 86 - - 6.9 176 0.5 12 2.6
EVR15-078S 7/8 22 0.7 19 3.4 86 - - 6.9 176 0.7 17
EVR20-078S 7/8 22 0.8 20 3.5 90 - - 7.5 191 0.7 17 5
EVR20-118S 1 1/8 28.8 0.8 20 3.5 90 - - 8.4 214 0.8 22
EVR22-138S 1 3/8 35 0.8 20 3.5 90 - - 11.1 281 1 25 6
EVR25-118S 1 1/8 28.8 1.5 38 5.4 138 2.8 72 10.0 256 0.8 22 10
EVR25-138S 1 3/8 35 1.5 38 5.4 138 2.8 72 11.0 281 1 25
EVR32-138S 1 3/8 35 1.9 47 4.4 111 2.1 53 11.0 281 1 25 16
EVR32-158S 1 5/8 42 1.9 47 4.4 111 2.1 53 11.0 281 1.1 29
EVR40-158S 1 5/8 42 1.9 47 4.4 111 2.1 53 11.0 281 1.1 29 25
EVR40-218S 2 1/8 54 1.9 47 4.4 111 2.1 53 11.0 281 1.3 34
Other information of EVR6-012S solenoid valve in refrigeration:
|Applicable Refrigerant||HCFC or HFC or CFC or (customer specialized)|
|Applicable Medium Temperature||-40~105℃|
|Standard Voltage of Solenoid Coil||AC380V AC220V (50/60HZ)|
|Allowable Voltage Fluctuation for Solenoid||+10%~-15%|
|Connection of Valve||Flange or Welding type|
EVR6-012S refrigeration solenoid valve how it works:
EVR6-012S refrigerant solenoid valve purpose:
Working principle of air - cooled water - cooled unit system:
Air cooled chillers use shell and tube evaporators to exchange heat between water and refrigerant. The refrigerant system absorbs the heat load of the water, and when the water cools and produces cold water, the heat is carried into the finned condenser by the compressor. Then the cooling fan loses to the external air (air cooling).
The shell and tube type evaporator is used in the water-cooled chiller to exchange heat between water and refrigerant. The refrigerant system absorbs the heat load of the water, which is cooled to produce cold water, and then the heat is carried into the shell and tube condenser by the compressor. The heat exchange between the refrigerant and water causes the water to absorb heat, which is then sent out from the external cooling tower through the water pipe (water cooling).
At the beginning, the low-temperature and low-pressure Refrigerant Gas is sucked away by the compressor after evaporating and cooling, and then compressed into high-temperature and high-pressure gas and sent to the condenser. The high-pressure and high-temperature gas is cooled by the condenser, which condenses the gas into high-pressure liquid at room temperature. When the room temperature high-pressure liquid flows into the thermal expansion, the valve is throttled into low-temperature low-pressure wet steam, which flows into the shell-and-tube evaporator and absorbs the heat of the frozen water in the evaporator to reduce the water temperature. The evaporative refrigerant is sucked back to the compressor for the next refrigeration cycle to achieve the refrigeration purpose.
Component construction and composition of refrigeration system with EVR6-012S refrigeration Solenoid Valve:
The basic refrigeration system of a chiller consists of four main components: a compressor, an evaporator, a condenser, and an expansion valve. In addition, in order to improve the performance of the refrigeration system, to achieve better performance, usually there are many auxiliary equipment: liquid pipeline solenoid valve, mirror, liquid pipe drying filter, high and low pressure controller.
Welcome to your inquiry!
NINGBO BRANDO HARDWARE CO.,LTD
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and Others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products:
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products